Skip to main content
28-0-3 · your ZIP

Scotts Weed & Feed calculator

Scotts Turf Builder Weed & Feed goes down at about 2.9 lbs per 1,000 sq ft, at most twice a year. It follows weed activity, not just grass growth: apply to damp grass with weeds actively growing, and wait 4 weeks before overseeding. Enter your lawn size and ZIP for the amount, bags, and timing.

Other top-rated lawn fertilizers

See all
  • The Andersons Professional PGF Complete 16-4-8 Fertilizer with 7% Humic DG (5,000 sq ft)

    The Andersons Professional PGF Complete 16-4-8 Fertilizer with 7% Humic DG (5,000 sq ft)

    Premium professional-grade fertilizer with 16-4-8 NPK and 7% humic DG. Super-fine particles distribute evenly with twice the particles per square foot of standard fertilizers. Top performer in lawn-care community testing.

    Check price
  • GS Plant Foods Liquid Kelp Fertilizer

    GS Plant Foods Liquid Kelp Fertilizer

    OMRI-listed liquid seaweed concentrate for root development and stress recovery. 1 gallon makes 800+ gallons of solution for lawns and gardens.

    Check price
  • PetraTools Liquid Nitrogen Fertilizer 28-0-0

    PetraTools Liquid Nitrogen Fertilizer 28-0-0

    High-nitrogen liquid fertilizer for quick green-up through foliar or soil application. Slow-release 28-0-0 formula, 32 oz. Ideal for spring and summer feeding.

    Check price

As an Amazon Associate we earn from qualifying purchases.

Spreader setting for Scotts Turf Builder Weed & Feed. See what we can verify for this bag, plus the calibration steps.

Look up my setting

Label rates at a glance

Every product below has its own label rate. The calculator uses the label rate as the source of truth and reports the nitrogen it delivers, so you can compare products fairly.

ProductN-P-KRate / 1,000 sq ftBag / bottleApps / yr
Milorganite 6-4-06-4-012.8 lbs32 lb / 2,500 sq ft4
Scotts Turf Builder Lawn Food32-0-42.5 lbs12.5 lb / 5,000 sq ft4
Scotts Turf Builder Weed & Feed28-0-32.9 lbs14.3 lb / 5,000 sq ft2
Scotts Turf Builder Triple Action25-0-22.8 lbs11.3 lb / 4,000 sq ft2
Scotts Turf Builder Southern Lawn Food32-0-102.8 lbs42.18 lb / 15,000 sq ft4
The Andersons PGF Complete 16-4-816-4-83.6 lbs18 lb / 5,000 sq ft5
Lesco 24-0-1124-0-114.2 lbs50 lb / 12,000 sq ft4
Simple Lawn Solutions Advanced 16-4-816-4-810 fl oz / 1,000 sq ft32 oz / 3,200 sq ft6
Ironite 1-0-11-0-13 lbs15 lb / 5,000 sq ft4
Scotts Turf Builder Starter Food for New Grass24-25-43 lbs15 lb / 5,000 sq ft1 (at seeding)

Why your schedule depends on your ZIP

A Milorganite schedule in Cleveland is not a Milorganite schedule in Atlanta. Cool-season lawns feed hardest in spring and fall and skip summer nitrogen in hot regions. Warm-season lawns feed through summer and stop before their fall dormancy. The calculator moves most windows by a fixed amount for your broad region, then uses your ZIP's average first frost to end warm-season feeding.

Cool-season lawns

Feed hardest in spring and fall. In hot regions the calculator drops summer feedings, because feeding heat-stressed fescue or bluegrass does more harm than good.

Warm-season lawns

Feedings start after full green-up, no earlier than May, and the last one lands at least 6 weeks before your ZIP's average first frost (a month for Milorganite). Weed and feed and crabgrass preventer follow weed timing instead, so they can come earlier.

Your region

Each broad region gets a fixed shift. Up north, spring feedings move later and fall feedings earlier. Down south it's the reverse. The same product gets a different calendar in each region.

Scotts Turf Builder Weed & Feed questions, answered

How much Scotts Weed & Feed do I use?

The label rate is about 2.9 lbs per 1,000 sq ft, so a 5,000 sq ft lawn uses roughly one 14.3 lb bag per application. The calculator scales it to your lawn size.

When should I apply Scotts Weed & Feed?

Apply when broadleaf weeds are young and actively growing, usually spring, with an optional fall pass. Grass should be damp (morning dew or a light watering) so the granules stick to weed leaves. Do not apply more than twice a year, and never on St. Augustine.

Can I seed after applying Weed & Feed?

No. Wait at least 4 weeks after a weed & feed application before overseeding, and do not apply it to newly seeded lawns until they have been mowed 3 to 4 times.

Tools to use next